Monday, September 5, 2016

Darkrasp, Evil Priest: Figure 242 of 266

  Some of you may remember that last December I converted an extra Darkrasp Evil Priest figure, that I had traded for back in 2013, into a Santa Claus figure.  Well, this week I finally got around to painting the original Darkrasp, Evil Priest, figure that came in the Dark Heroes set from my original Kickstarter pledge; and once again I did a conversion. :)
    A bit of train of thought now...  As I looked at this figure and pondered how to paint it, I considered how most of the painted examples of this figure that I have seen have been done up in dark colors: black, grey, brown; and I decided that I wanted to do something different, so I thought about light colors. Immediately I thought, "How about white?". As I considered white, I thought that with his flowing robes white would make him look almost like an angel; which led me to think that, well, if he was an angel then he'd be The Angel of Death, which would be kind of be a cool figure.  If I was going to sell the angel idea he would need wings though; and where would I get wings?  So I started pawing through my unpainted Bones collection, remembering that the Lesser Demons set had a bunch of winged figures in it. And, voila! I found what I thought would be the perfect set of wings there among the Lesser Demons: The Vulture Demon
      I was able to pry the wings off the figure, and I held them up against the Darkrasp figure to see how they looked.  I couldn't believe what a perfect match they were!  Not only did they seem the perfect size, and were feather covered; but they also mirrored the symmetry of the figure with the left wing raised like the left arm, and the right wing extended to match the position of the scythe.  So, I used my Dremel with a small drill bit to cut a slot in Darkrasp's back, and glued the wings in place with Gorilla Superglue.

     I began by painting his face and hands with Americana "Shading Flesh".   I then painted his robes with Folk Art "Platinum Grey", and his wings with Americana "Bleached Sand".
      Next, I painted the scythe handle and the skull on the top with Americana "Khaki Tan".  I then painted the scroll with Americana "Buttermilk", after which I painted the scroll holder, chains, incense container, and scythe blade with Accent "Mustard Seed".
      I repainted the parts I had painted "Mustard Seed", this time using Ceramcoat "Bronze".   Then, after everything had a while to dry, I gave the entire figure a wash with Citadel "Agrax Earthshade" wash using a wet brush.
      When the wash was dry, I drybrushed the wings using, first, Crafter's Acrylic "Light Antique White", and then plain White.  Next, I painted highlights on his robes, layering up from, first, the Platinum Grey", then Americana "Dove Grey", and then plain White.
      I then highlighted the scroll using the base "Buttermilk"; and then highlighted the scythe handle and the skull on top using, first, Crafter's Edition "Taupe", and then the "Taupe" mixed with a little of the "Bleached Sand".  I painted his beard Black after that.
     I highlighted the beard with Citadel "The Fang",  and then used Americana "Zinc" to paint all the shadows under his robe where it was raised up along the bottom, as well as inside his raised left sleeve.   I painted his eyes, and then highlighted his face and hands with the base "Shading Flesh".  I mixed in a little Crafter's Acrylic "Flesh" to highlight the tip of his nose.  Next, I highlighted all the parts I had painted "Bronze", using Ceramcoat "Wedding Gold".  And, lastly, I painted the figure's integral base using Ceramcoat "Walnut".
      After the figure had overnight to dry, I gave it a coat of Ceramcoat "Matte Varnish".   When the varnish was dry, I flocked the base, and the next day I sprayed the figure with Testor's Dullcote.
 


     I really like how this conversion turned out.  I think he makes for a very formidable angel, and I think the all-white paint job looks really good on the figure.

Thursday, September 1, 2016

Ape Demon as Frostgrave White Gorilla: Bones II Figure

     For a while I had been pondering what figure to use for the White Gorilla creature from the Frostgrave rules.   Then one day, while looking for something else, I spotted the Ape Demon figure from the Bones II Lesser Demons set, and I thought, "Why not?"  Maybe the White Gorillas of Frostgrave are the descendants of some bizarre experiment of a misguided wizard long ago who thought it would be a good idea to cross a bat with a gorilla. (Maybe so he could quickly run errands for him through the crowded city.  That's why he has the one big ear; (so he can hear his master call him home), and the big hands so he can carry the grocery shopping!) Over the centuries the wings have become flightless, but they still make the creature look fearsome. :)
    I prepped the figure in the usual way; soaking it in a dish of water with a couple drops of dish- soap added, then giving it a light scrub with a soft toothbrush, and then rinsing and drying it.  I then glued the figure to a white-primed 1,25" fender washer with Aleene's Tacky glue, and then glued the washer-mounted figure to a tongue depressor with a couple drops of the Elmer's glue.
      I began by painting his skin and the underside of the wings with a mix of Americana "Shading Flesh" and Folk Art "Barnyard Red".  I then painted his fur with Americana "Bleached Sand", and used that color to paint his teeth as well.  Next, I painted the talons on his wings with Americana "Zinc", and then painted his tongue with Crafter's Acrylic "African Violet".
      I let all the paint dry for a while and then gave the entire figure a wash with Citadel "Agrax Earthshade" wash using a wet brush".
     After the wash was dry, I worked on highlighting his fur, first drybrushing it with Crafter's Acrylic "Light Antique White", and then with plain White. I also used the "Light Antique White" to highlight his teeth.  Next I painted his eyes, and then highlighted his skin with the "Shading Flesh".   Then i did a quick highlight on the tip of his tongue using a mix of Apple Barrel "Apple Lavender" and the "African Violet".  I highlighted his talons with Folk Art "Rock Grey, and painted his finger nails with Folk Art "Platinum Grey".
   I decided I wanted to add a little something to the large bare spot on the front of the base, so I glued on a little bit of cork rubble and a little piece of gravel, and when the glue was dry I painted it with Americana "Zinc".  I then drybrushed it with Crafter's Acrylic "Storm Cloud Grey", and then the "Platinum Grey", and lastly some plain White.    I painted the figures integral base and the rest of the fender washer base white.
   When everything had overnight to dry, I gave the figure a coat of Ceramcoat "Matte Varnish" early the next morning.  Midday, I flocked the white areas with Woodland Scenics "Snow" flock and the next day I sprayed the figure with Testor's Dullcote.

     I really like how this fellow turned out.  And I think he fills the role of descendant of bizarre wizard's experiment just as well as he did as his intended use as a demon! :)

Monday, August 29, 2016

Mangu Timur and Ragnaros, Evil Warrior: Figures 240 & 241 of 266

  This past week I dove into the Dark Heroes set and painted the two knights, Mangu Timur and Ragnaros, Evil Warrior, from that set. Since the way I planned to paint them was so similar I figured I'd just do them at the same time.  I'm also happy to have reached the 240's; it makes my goal seem that much closer. :)
     I prepped the figures in the usual way; soaking them in a dish of water with a couple drops of dish- soap added, then giving them a light scrub with a soft toothbrush, and then rinsing and drying them.  I then glued Mangu Timur to a black primed 1" fender washer, and Ragnaros to a 1.25" black-primed fender washer.  I then glued the washers to a tongue depressor with a couple drops of Elmer's glue each.
     I began by painting both figures Black.  I then drybrushed the figure with Accent "Princely Pewter", followed by a light highlight drybrushing with Folk Art "Silver Sterling".
     I then painting the waist hangings and shield on the Mangu Timur with Apple Barrel "Apple Black Green".  I then moved to Ragnaros and painted all the decorative skulls and his shield with Ceramcoat "Opaque Red".  I then painted his horns with Folk Art "Barnyard Red".   Next, I went back to Mangu Timur and painted the decorative details on his waist hangings, shield, as well as the hilt of his sword with Ceramcoat "Raw Sienna".
     I then repainted the parts I had painted with the "Raw Sienna", this time using Ceramcoat "Bronze".  I also repainted all the red skulls on Ragnaros using Dazzling Metallics "Festive Red".  I let the paint dry for a while, after which I gave a wash with Citadel "Nuln Oil" wash using a wet brush to the parts I had just painted with the "Apple Black Green", "Bronze", Opaque Red", "Barnyard Red", and "Festive Red".
          When the wash was dry, I began work on the highlights.  I started on Mangu Timur, highlighting his waist hangings and shield with Apple Barrel "Apple Blue Spruce".  I then highlighted all the parts I had painted "Bronze", using Ceramcoat "14K Gold".  I highlighted his sword with Silver Sterling", and when it was dry, I applied a wash down the center of the sword with Iron Wind Metals "Mid Green" ink using a wet brush.
     I then turned to Ragnaros.  I bean by highlighting his horns with the base "Barnyard Red", and then mixed a little Americana "Terra Cotta" in it to highlight the ends of the horns.  Next, I Highlighted his shield with Americana "Cadmium Red".  I panted the back of his loin hanging, and the claws on his shield with Black, and then added highlights to the Black with Citadel "The Fang".   While I had the Black out, I also painted his sword, an the sword grips on both figures.  Next, I highlighted the skulls I had painted the metallic "Festive Red", using a mix of the "Festive Red" and Americana "Tangerine".   I then repainted his word with Folk Art Metallics "Gunmetal Grey", and then highlighted it with the "Silver Sterling".
     While I had the "Silver Sterling" out, I added specific highlights on each figure where I felt they were needed, then I let everything dry over night.  The next day I gave the figures a coat of Ceramcoat "Matte Varnish" and, when dry, flocked their bases.  Another overnight dry, and I sprayed them with Testor's Dullcote".


    I'm pleased with how these two knights turned out.   I didn't attempt anything too fancy on them, just did them up for tabletop use.

Thursday, August 25, 2016

Mashaaf, Great Old One: Bones II Figure

  A few months ago I began working on the Mashaaf, Great Old One, add-on figure from Bones II, and had gotten as far as washing it, assembling it, and spraying it with a base coat.  It had then sat gathering dust, waiting for me to find inspiration to complete it.  Then, with the successful competition of my Kaladrax figure a couple weeks ago, I felt emboldened to bite the bullet and finish this figure up as well.
   When purchasing this figure I had some vague idea of using it for my Pulp mash-up Space1889/John Carter of Mars games, so I pictured in some sort of tan,bron,reddish type of color scheme.  However, i didn't want to limit it to just Mars, so I wanted to tone the base colors down so they might just as well blend in with any desert setting.
    I prepped the figure in the usual way; soaking all the pieces it in a bowl of water with a couple drops of dish-soap added, then I gave them all a light scrub with a soft toothbrush, and then rinsed and dried them.  I then assembled the figure using Gorilla superglue.   Next, I  used Aleene's Tacky glue to glue the base to a n old CD.
    When everything was dry, I used masking tape to taped off the area of the base where the figure was going to be glued, and taped the underside of the figure where it sat on the base as well.
     I then sprayed both the base and the figure itself with Krylon Camouflage with Fusion "Khaki".  This left the model a little tacky, but I knew from having  used this to paint some of my CAV that once I painted over the tacky basecoat, it would be fine.
   I then began easing into the project by painting the base.  I felt if I could establish a color palette I liked on the base, it would help me decide which direction to take the figure.  I painted various mottled areas using Folk Art "Baryard Red", Americana Terra Cotta, and Ceramcoat "Territorial Beige"; applying one color right after the other while they were still wet so they would lend together a bit.
When these colors were dry, I applied some white glue to the areas that were the plain surface of the CD, and then sprinkled the glue with a mix of regular course sand, and a reddish-orange decorative sand.   When that was dry, I gave the entire base a wash with Citadel "Agrax Earthshade" wash using a wet brush.
   When the wash was dry, I drybrushed the base with Americana Shading FLesh", Folk Art "Butter Pecan", Folk Art "Almond Parfait", and lastly, Americana "Bleached Sand".
    I then started work on the big worm itself.  First, I painted the underbelly with the "Bleached Sand".  I then painted the crusty rock-like bumps on its back with the "Terra Cotta", and the pustule like citcles running alng the sides with the "Barnyard Red".
     Next, I painted the two large scythe-like talons, as well as the little ones running down the side with Folk Art "Gray Green" .  I also used this color to pint the two blade-like protrusions on each side of the mouth, and the four covering its little anus.   I then painted the tentacles and mouth with Apple Barrel "Apple Light Pink", and his eyes with Black.  I also used the Black to paint the very back of his mouth, blending it with a little of the "Apple Light Pink" to try and create the illusion of a receding hole down his gullet. I folllowed this with painting the teeth with Americana "Buttermilk"
    At this point I deiced to go ahead and glue it to the base, as I was having trouble holding it and either wearing off the dry paint, or putting my fingers in areas where it was still wet.   Once the glue had a while to dry, I gave the entire figure a wash with the "Agrax Earthshade" using a wet brush.
     When the wash was dry, I began the final drybrushing of the highlights.  I drybrushed his back with a mix of Accent "Golden Oxide" and the "Buttermilk", and then drybrushed the bulk of the body with a mix of Americana "Khaki Tan" and Crafter's Acrylic "Light Antique White".   I then mixed a bit of the "Barnyard Red", and the "Apple Light Pink", and used that to paint highlights on the pustules. I highlighted the mouth and tentacles with a mix of the "Apple Light Pink" and the "Light Antique White"; and the highlighted the talons, and the mouth and anus blades,  with a mix of the original "Gray Green", and the "Light Antique White".  I also highlighted the teeth with the "Light Antique White".  Lastly, I used White to add tiny reflective dots to the eyes.
     After the figure had overnight to dry, I gave it a coat of Ceramcoat "Matte Varnish".   The next morning I sprayed the figure with Testor's Dullcote.  
John Carter and Dejah Thoris battle a strange creature from the Barsoomian wastes.
     Note: the colors appear a little washed out in these photos.  I think it may have been the lighting I used, or the fact that the background cloth was relatively dark.



     I'm really happy with how this big fella came out; and have an increased confidence in tackling these big miniatures.  Which is good considering I have a number of them coming up in the not-too-distant future in the Bones I painting queue.

Monday, August 22, 2016

Undertaker and Oswald the Overladen: Figures 238 & 239 of 266

This past weekend I finished up the Townsfolk set by painting both the Undertaker, and Oswald the Overladen, figures.  This set now joins the list of Completed Sets over on the right.
     I prepped the figures in the usual way; soaking them in a dish of water with a couple drops of dish- soap added, then giving them a light scrub with a soft toothbrush, and then rinsing and drying them.  I then glued Oswald to a white-primed 1" fender washers with Aleene's Tacky glue (as I planned to use him for Frostgrave as a "Pack Mule" type soldier as introduced in The Thaw of the Lich Lord supplement), and the Undertaker to a black primed 1" fender washer.  I then glued the washers to a pair of tongue depressors with a couple drops of the Elmer's glue each.
     I started with the Undertaker.
     I began by painting the figure entirely with Black.  I then drybrushed it with Citadel "The Fang", and then did lighter drybrushed highlights with Folk Art "Cloudy Day". I then painted his face with Folk Art "Milkshake".
     Next, I painted his gloves with Nicole's "Brown", his socks with Americana "Neutral Grey", and the shovel handle with Folk Art "Barnwood".   I then applied some Iron Wind Metals "Yellow" ink to the panes of his lantern.  When that was dry, I added a little Iron Wind Metals "Orange" ink around the edges of the panes.
    I then painted some Citadel "Agrax Earthshade" wash on his face, gloves, and shovel handle using a wet brush.   When the wash was dry, I painted his eyes.  I also painted some rust on his shovel handle and head using  first Americana "Raw Umber", and then some thinned Crafter's Edition "Spice Brown".  While I had the "Spice Brown" out, I used it to highlight his gloves.
     Next, I did highlights on his face with the "Milkshake", and then finished off the rust effects by adding some thinned Ceramcoat "Raw Sienna". AFter that, I lightly drybrushed the head of the shovel with Folk Art Metallics "Gunmetal Grey".  I then used Crafter's Acrylic "Daffodil Yellow" to highlight the eyes in the lantern's skulls, and then I used it to do a light drybrushing down the figure's front to create a simple Object Source Lighting (OSL) effect.
          I let the figure sit all day, and that evening I gave it a coat of Ceramcoat "Matte Varnish".  The next morning I flocked his base with a mix of sand and dried coffee grounds; and when the Oswald figure was finished, I sprayed them both with Testor's Dullcote.


     Next, I painted Oswald the Overburden.
    I began by giving the figure a wash with thinned Reaper "Grey Liner" to help delineate all the things he had packed on him.
     I then used the "Milkshake to paint his face, Folk Art "Grey Green" to paint his shirt, and the "Brown to paint his jacket.  I then painted the collar with Americana "Terra Cotta", and his pants with the "Neutral Grey".
     Next, I painted his hat with Reaper MSP Bones "Cinnamon Red", and then painted his boot with Crafter's Acrylic "Cinnamon Brown".  I painted his gloves with Americana "Zinc", and then painted the large pouch hanging at his waist in the front with Ceramcoat "Territorial Beige".
     I then began to paint all the various objects hanging from poor Oswald.  I didn't keep track of what colors, as I was grabbing them here and there from my painting table.
     After I was done, I gave the entire figure a wash with Citadel "Agrax Earthshade" wash using a wet brush.  When the wash was dry, I painted in his eyes and then highlighted his face with the "Milkshake".
     I highlighted his hat with Americana "Cadmium Red", and his shirt with the original Grey "Green".  Next, I highlighted his collar with Accent "Golden Oxide", his jacket and boots with Americana "Sable Brown".  I then highlighted his gloves and his pants with Folk Art "Rock Grey".  I did a little highlighting on the various objects he's carrying, but mostly  I let the wash suffice to add contrast.   Lastly, I painted his base White.
     When everything had overnight to dry, I gave the figure a coat of Ceramcoat "Matte Varnish" early the next morning.  Midday, I flocked the white areas with Woodland Scenics "Snow" flock and the next morning I sprayed the figure with Testor's Dullcote.
     I'm happy how these two figures turned out, and am happy to have another set under my belt.  Next up is the Dark Heroes set.  I'm going to try and start posting Bones 1 figures on both Monday and Thursday in effort to really push through these last remaining few sets before the year ends.

Thursday, August 18, 2016

Michelle, Female Human Ranger

   I ordered this figure a while back to round out an order from Reaper to qualify for the free shipping.  With the death of my Treasure Hunter Jack2 in last months Frostgrave game, it was time to paint up a new one; so I grabbed this one to use.
  The first thing I did was trim down the sword in her left hand, so it resembled a dagger a little bit more; thus better fitting the official Treasure Hunter description.  I then prepped the figure in the usual way; soaking it in a dish of water with a couple drops of dish- soap added, then giving it a light scrub with a soft toothbrush, and then rinsing and drying it.  I then glued the figure to a white-primed 1" fender washer with Aleene's Tacky glue, and then glued the washer-mounted figure to a tongue depressor with a couple drops of the Elmer's glue.
     I then gave her a wash with Reaper "Grey Liner" using a wet brush to help me see all the pieces of her outfit better.
   I began painting by doing her face with GW "Bronze Flesh".  I then painted her tunic with Ceramcoat "Black Cherry", and her under-shirt with Crafter's Acrylic "Bright Blue".
     Next, I painted her leather armor with Citadel "Snakebite Leather", and painted on gloves using Folk Art "Dapple Gray".
   At this point I started to feel that she might need a little something extra to sell the idea of being a treasure hunter, so I took one of the rope coils from the Frostgrave Soldiers boxed set from North Star, and sprayed it with flat white spray paint.   I then filed away an area of paint on her left hip, and used super glue to glue the rope coil in place.
    I painted the rope coil with Folk Art "Butter Pecan", and after it had a while to dry, I gave the whole figure a wash with Citadel "Agrax Earthshade" wash using a wet brush.  When the wash was dry, I painted her cape with Crafter's Acrylic "Navy Blue" and her hair with Black.  I let the cape dry a bit, and then I gave it a wash with Citadel "Nuln Oil" wash using a wet brush.  I then painted her eyes.
After her eyes, I painted her lips with a mix of GW Vermin Brown, Americana "Shading Flesh", the "Bronze Flesh", and Crafter's Acrylic "Flesh".  I  then highlighted her skin with a mix of the "Bronze Flesh" and "Flesh".  Next, I highlighted her hair with Citadel "The Fang", and then did lighter highlights with FolkArt "Cloudy Day".   I highlighted her cape with Americana "True Blue", and then highlighted her under-shirt with a mix of the "Bright Blue" and "White".  After that I highlighted her tunic with Americana Cranberry Wine", and then added a little Crafter's Acrylic "Tutti Frutti" to the "Cranberry Wine" to do lighter highlights.  Next, I highlighted the rope coil using a mix of Americana "Khaki Tan", and Americana "Bleached Sand".  Then I highlighted her leather armor using a mix of the base "Snakebite Leather", and Ceramcoat "Maple Sugar Tan", and did her gloves using a mix of the "Dapple Gray" and Folk Art "Gray Green".  Then I painted both her sword and dagger with Americana "Zinc".  When dry, I painted them again with Folk Art Metallics "Gunmetal Grey", and also used this color to paint all the buttons on her cape.  I then highlighted the sword, dagger, and buttons with Folk Art "Silver Sterling".
     Lastly, I painted the figures base with White.  When everything had overnight to dry, I gave the figure a coat of Ceramcoat "Matte Varnish" early the next morning.  Midday, I flocked the white areas with Woodland Scenics "Snow" flock and the next day I sprayed the figure with Testor's Dullcote.
   
     I'm happy with how my new warband member came out, but a bit surprised at how similar her skin tone ended up looking to her leather armor.  Considering I used totally different paints, both base coat and highlights, it is an unexpected, and unfortunate, close match.