Readers may remember that last week I posted a test paint of one of the Pathfinder Goblin Pyros as a Christmas Elf. Well, this week I painted up three more Pathfinder Goblins as Christmas Elves to complete the Thief contingent for my Santa themed Enchanter warband for Frostgrave.
I prepped the figures in the usual way; soaking them in a dish of water with a couple drops of dish- soap added, then giving them a light scrub with a soft toothbrush, and then rinsing and drying them. I took one of the torch-wielding ones and sliced off the torch flush with the hand, drilled out the hand, and inserted a piece of bent paperclip wire to represent a candy cane. I then glued each figure to a white-primed 1" fender washers with Aleene's Tacky glue. I then glued the washers to a tongue depressor with a couple drops of the Elmer's glue each.
Like with my test figure, since the goblins/elfs had bear feet, I used a glob of the Tacky glue on the front of each foot to help obscure the toe delineations.
I began by painting the faces and hands with Crafter's Acrylic "Flesh".
I then painted the clothing and armor with Americana "Forest Green", Crafter's Acrylic "Wild Green", and Crafter's Acrylic "Deep Red"; alternating which items I used each color on as I went down the line of figures, trying not to use the same color on the same area for each goblin. I also used the "Deep Red" to paint the feathers on the first goblin's hat.
Next, I painted the shoes with Nicole's "Brown", and the torch and sword grips with Americana "Dark Chocolate". I also painted the candy cane with White. I painted their little pouches with Ceramcoat "Territorial Beige". Then I painted the rocks the first and third goblins are standing on using Americana "Zinc".
Next, I applied a wash to the figures using GW "Agrax Earthshade" wash with a wet brush. When the wash was dry, I painted the eyes; and then used some Black to paint the inside of the open mouths. Then I used White to paint the teeth I then used the original "Flesh " to highlight the hands and face. I mixed some Crafter's Acrylic "Tutti Frutti" with some of the "Flesh", and applied pink highlights to the cheeks and nose. I used Crafter's Acrylic "Christmas Red" to paint the stripes on the candy cane.
I then worked on highlighting their clothing and armor. I used the original "Wild Green" mixed with some White to highlight the part I had painted "Wild Green'. I used Crafter's Acrylic "Holiday Green" mixed with a little of the "Wild Green" to highlight the parts I had painted "Forest Green". And Crafter's Acrylic "Christmas Red" mixed with a tiny bit of the "Tutti Fruity" to highlight the parts I had painted "Deep Red".
Next, I painted the swords with Crafter's Acrylic "Storm Cloud Grey" and used Black to paint in the holes in the swords. I then used a little GW "Badab Black" wash on the area where the rivets connect the sword to their grips. Next, I used Americana "Zinc" to paint all the areas of stitching on their armor. I then painted the little balls on their sword grips: the first one I did with the "Holiday Green", the second with Crafter's Edition "Purple Passion", and the third with Crafter's Acrylic "Bright Blue".
I used White to highlight the forearm wrappings. Then I used Americana "Sable Brown" to add highlights to the shoes and Americana "Khaki Tan" to do highlights on the pouchs around back. I then painted the cross stitching on the hat, and the ribbon on the torch with the "Deep Red". Then I went back and highlighted the cross stitching on the hat, and the ribbon on the torch, with the "Christmas Red". Next, I painted the swords with Folk Art Metallics "Gunmetal Grey". I then used Folk Art Metallics "Silver Sterling" to highlight the swords, and the stitching on the armor (I wanted it to look like maybe it was tinsel). Then I used Folk Art Metallics "Emerald Green" to overpaint the ball at the end of the first sword, Folk Art Metallics "Blue Sapphire" for the second, and Folk Art Metallics "Amethyst" for the third. I followed this with adding a couple White highlights to each ball.
Lastly, I worked on the flame on the torch. I started by painting the base of the flame, and the very tips of the flame, with Black. I then worked from the flame's base, upwards, using: Crafter's Acrylic "Daffodil Yellow", Crafter's Acrylic "Pure Pumpkin", the "Christmas Red", and then some Ceramcoat "Black Cherry". I applied these colors in fast succession so the paint would still be wet with each successive color allowing me to blend them together. After this, I wrapped things up by painting the figures' bases with White.
When everything had overnight to dry, I gave the figures a coat of Ceramcoat "Matte Varnish" early the next morning. Midday, I flocked the white areas with Woodland Scenics "Snow" flock and late that afternoon I sprayed the figures with Testor's Dullcote.
I am really happy with how this little band of Christmas elves turned out. Not everybody is cut out to work in the toy workshop, and these fellows seem just right for helping Santa with his more dangerous missions. :)
My Efforts to Paint the Miniatures From the 1st, 2nd, 3rd, and 4th BONES Kickstarters!
Thursday, May 12, 2016
Monday, May 9, 2016
Merisiel, Iconic Rogue: Figure 217 of 266
I continue to work on the Iconics and Officially Licensed Pathfinder Miniatures Set, and finished up Merisiel, Iconic Rogue, over the weekend. Looking at this figure, I kind of pictured her in all black; and then for some reason I got the idea that it might be a neat contrast to give her white hair.
I prepped the figure in the usual way; soaking it in a dish of water with a couple drops of dish- soap added, then giving it a light scrub with a soft toothbrush, and then rinsing and drying it. I then glued the figure to a black-primed 1" fender washer with Aleene's Tacky glue, and then glued the washer-mounted figure to a tongue depressor with a couple drops of the Elmer's glue.
I began by painting the body entirely Black. I then drybrushed it with a mix of Americana "Zinc" and Ceramcoat "Denim Blue".
I then did a lighter drybrush using a mix of "Crafter's Acrylic "Storm Cloud Grey", and the "Denim Blue". Next, I painted her face and ears with Crafter's Acrylic "Flesh", and her hair and and weapon blades wth the "Zinc".
I gave the face a wash with GW "Agrax Earthshade" wash using a wet brush. Then, when that was dry, I worked on highlighting the hair; first with Folk Art "Platinum Grey", and then pure White. Next, I painted the eyes and lips, and then highlighted the face and ears with the base "Flesh", and then the "Flesh" with a little White added to it.
I then added some highlights to the dagger handles with Americana Neutral Grey", and did some spot highlights to her outfit with the "Denim Blue". I finished up with the metallics; painting her two blades with Folk Art Metallics "Gunmetal Grey", and then highlighting with Folk Art Metallics "Silver Sterling".
After the figure had overnight to dry, I gave it a coat of Ceramcoat "Matte Varnish". Later that morning I flocked the base, and that evening I sprayed the figure with Testor's Dullcote.
I took a big shortcut with this figure by just doing it all black with some drybrushing, but for a gaming figure I think that's okay and I think the all-black look suits this figure. In the end, I'm happy with how it came out.
Figure 217 of 266: Complete
I prepped the figure in the usual way; soaking it in a dish of water with a couple drops of dish- soap added, then giving it a light scrub with a soft toothbrush, and then rinsing and drying it. I then glued the figure to a black-primed 1" fender washer with Aleene's Tacky glue, and then glued the washer-mounted figure to a tongue depressor with a couple drops of the Elmer's glue.
I began by painting the body entirely Black. I then drybrushed it with a mix of Americana "Zinc" and Ceramcoat "Denim Blue".
I then did a lighter drybrush using a mix of "Crafter's Acrylic "Storm Cloud Grey", and the "Denim Blue". Next, I painted her face and ears with Crafter's Acrylic "Flesh", and her hair and and weapon blades wth the "Zinc".
I gave the face a wash with GW "Agrax Earthshade" wash using a wet brush. Then, when that was dry, I worked on highlighting the hair; first with Folk Art "Platinum Grey", and then pure White. Next, I painted the eyes and lips, and then highlighted the face and ears with the base "Flesh", and then the "Flesh" with a little White added to it.
I then added some highlights to the dagger handles with Americana Neutral Grey", and did some spot highlights to her outfit with the "Denim Blue". I finished up with the metallics; painting her two blades with Folk Art Metallics "Gunmetal Grey", and then highlighting with Folk Art Metallics "Silver Sterling".
After the figure had overnight to dry, I gave it a coat of Ceramcoat "Matte Varnish". Later that morning I flocked the base, and that evening I sprayed the figure with Testor's Dullcote.
I took a big shortcut with this figure by just doing it all black with some drybrushing, but for a gaming figure I think that's okay and I think the all-black look suits this figure. In the end, I'm happy with how it came out.
Figure 217 of 266: Complete
Thursday, May 5, 2016
Pathfinder Goblin Pyro as Christmas Elf: Bonus "Bones 1" KS Figure Post
This week I experimented with painting up one of the Pathfinder Goblin Pyros from the We Be Goblins set, that was part of the Bones I Kickstarter; to see how it would look painted up as one of Santa's Elves for my Santa themed Enchanter warband for Frostgrave. I had already officially painted these figures previously, but had picked up a few more of them along the way because they're such fun figures.
I had planned a while back that I wanted to use Christmas elves to represent the four Thieves I had added to my Santa the Enchanter's warband; and had originally prepped four of the Victory Force Miniatures, Unarmed Christmas Elves to use in this role. Then over on the Reaper forum, forum member Pippin suggested I possibly use Goblinsto represnt Santa's elves. The idea buzzed around in my head for awhile, as I wasn't totally happy with the Victory Force Elves. I felt they looked a little too Elf-On-The-Shelf modern. So, I thought I'd do this test on the Pathfinder Goblin kind of as a proof-of-concept as to whether using them for Christmas Elves would work.
I prepped the figure in the usual way; soaking for a few hours in water with a bit of dish soap added, giving a gentle scrub with an old soft toothbrush, then rinsing and drying. I then glued it to 1" white-primed fender washers with Aleene's Tacky glue, and then glued the washer to a tongue depressor with a couple small dabs of Elmer's white glue, for ease of handling during painting.
I realized the goblin/elf had bear feet, but I wanted it to have shoes; so I used a glob of the Tacky glue on the front of each foot to help obscure the toe delineations.
I began by painting the face and hands with Crafter's Acrylic "Flesh". I then painted the outer clothing Americana "Forest Green", and the leggings, undershirt, and hat with Crafter's Acrylic "Wild Green".
Next, I painted the armor with Crafter's Acrylic "Deep Red". I then painted the sword, and the feather on the sleeve, with Crafter's Acrylic "Storm Cloud Grey", and the torch handle with Nicole's "Brown". The wrappings on the forearms I painted with Folk Art "Platinum Grey". I painted the little pouch around back with Ceramcoat "Territorial Beige".
I decided at this point to paint the shoes with the "Brown" I had used on the torch handle, so I went back and repainted the torch handle with Americana "Raw Umber". I then applied a wash to the entire figure using GW "Agrax Earthshade" wash with a wet brush. I also used some Black to paint in the holes in the sword, and the open mouth. When the wash was dry, I painted the eyes, and used White to paint the teeth I then used the original "Flesh " to highlight the hands and face.
When the wash was dry, I highlighted the hat, undershirt and leggings with the original "Wild Green". I then highlighted the outer clothing with Crafter's Acrylic "Holiday Green", and the armor with Crafter's Acrylic "Christmas Red". I used White to highlight the forearm wrappings and the feather. Then I used Americana "Sable Brown" to add highlights to the shoes and Americana "Khaki Tan" to do highlights on the pouch around back. I then painted the cross stitching on the hat, and the ribbon on the torch with the "Deep Red", and then did the cross stitching on the armor with Americana "Zinc". Then I went back and highlighted the cross stitching on the hat, and the ribbon on the torch, with the "Christmas Red". I also used this color to paint the ball at the end of the sword handle. Next, I painted the sword with Folk Art Metallics "Gunmetal Grey". I then used Folk Art Metallics "Silver Sterling" to highlight the sword, and the stitching on the armor (I wanted it to look like maybe it was tinsel). Then I used Dazzling Metallics "Festive Red" to overpaint the ball at the end of sword, and added a couple White highlights.
Lastly, I worked on the flame on the torch. I started by painting the base of the flame, and the very tips of the flame, with Black. I then worked from the flame's base, upwards, using: Crafter's Acrylic "Daffodil Yellow", Crafter's Acrylic "Pure Pumpkin", the "Christmas Red", and then some Ceramcoat "Black Cherry". I applied these colors in fast succession so the paint would still be wet with each successive color allowing me to blend them together.
The figure was all but done now, though as I looked at it I felt the face was a bit too pale and ashen colored and needed a bit more life in it. So I mixed some Crafter's Acrylic "Tutti Frutti" with some of the "Flesh", and applied pink highlights to the cheeks and nose. After this, I wrapped things up by painting the figure's base with White.
When everything had overnight to dry, I gave the figure a coat of Ceramcoat "Matte Varnish" early the next morning. Midday, I flocked the white areas with Woodland Scenics "Snow" flock and late that afternoon I sprayed the figure with Testor's Dullcote.
I have to say that I'm really pleased with how this figure turned out, and I think the idea of using these fellows for Santa's Elves is going to be a winner. Even as I type, I have three more prepped and awaiting painting.
I had planned a while back that I wanted to use Christmas elves to represent the four Thieves I had added to my Santa the Enchanter's warband; and had originally prepped four of the Victory Force Miniatures, Unarmed Christmas Elves to use in this role. Then over on the Reaper forum, forum member Pippin suggested I possibly use Goblinsto represnt Santa's elves. The idea buzzed around in my head for awhile, as I wasn't totally happy with the Victory Force Elves. I felt they looked a little too Elf-On-The-Shelf modern. So, I thought I'd do this test on the Pathfinder Goblin kind of as a proof-of-concept as to whether using them for Christmas Elves would work.
I prepped the figure in the usual way; soaking for a few hours in water with a bit of dish soap added, giving a gentle scrub with an old soft toothbrush, then rinsing and drying. I then glued it to 1" white-primed fender washers with Aleene's Tacky glue, and then glued the washer to a tongue depressor with a couple small dabs of Elmer's white glue, for ease of handling during painting.
I realized the goblin/elf had bear feet, but I wanted it to have shoes; so I used a glob of the Tacky glue on the front of each foot to help obscure the toe delineations.
I began by painting the face and hands with Crafter's Acrylic "Flesh". I then painted the outer clothing Americana "Forest Green", and the leggings, undershirt, and hat with Crafter's Acrylic "Wild Green".
Next, I painted the armor with Crafter's Acrylic "Deep Red". I then painted the sword, and the feather on the sleeve, with Crafter's Acrylic "Storm Cloud Grey", and the torch handle with Nicole's "Brown". The wrappings on the forearms I painted with Folk Art "Platinum Grey". I painted the little pouch around back with Ceramcoat "Territorial Beige".
I decided at this point to paint the shoes with the "Brown" I had used on the torch handle, so I went back and repainted the torch handle with Americana "Raw Umber". I then applied a wash to the entire figure using GW "Agrax Earthshade" wash with a wet brush. I also used some Black to paint in the holes in the sword, and the open mouth. When the wash was dry, I painted the eyes, and used White to paint the teeth I then used the original "Flesh " to highlight the hands and face.
When the wash was dry, I highlighted the hat, undershirt and leggings with the original "Wild Green". I then highlighted the outer clothing with Crafter's Acrylic "Holiday Green", and the armor with Crafter's Acrylic "Christmas Red". I used White to highlight the forearm wrappings and the feather. Then I used Americana "Sable Brown" to add highlights to the shoes and Americana "Khaki Tan" to do highlights on the pouch around back. I then painted the cross stitching on the hat, and the ribbon on the torch with the "Deep Red", and then did the cross stitching on the armor with Americana "Zinc". Then I went back and highlighted the cross stitching on the hat, and the ribbon on the torch, with the "Christmas Red". I also used this color to paint the ball at the end of the sword handle. Next, I painted the sword with Folk Art Metallics "Gunmetal Grey". I then used Folk Art Metallics "Silver Sterling" to highlight the sword, and the stitching on the armor (I wanted it to look like maybe it was tinsel). Then I used Dazzling Metallics "Festive Red" to overpaint the ball at the end of sword, and added a couple White highlights.
Lastly, I worked on the flame on the torch. I started by painting the base of the flame, and the very tips of the flame, with Black. I then worked from the flame's base, upwards, using: Crafter's Acrylic "Daffodil Yellow", Crafter's Acrylic "Pure Pumpkin", the "Christmas Red", and then some Ceramcoat "Black Cherry". I applied these colors in fast succession so the paint would still be wet with each successive color allowing me to blend them together.
The figure was all but done now, though as I looked at it I felt the face was a bit too pale and ashen colored and needed a bit more life in it. So I mixed some Crafter's Acrylic "Tutti Frutti" with some of the "Flesh", and applied pink highlights to the cheeks and nose. After this, I wrapped things up by painting the figure's base with White.
When everything had overnight to dry, I gave the figure a coat of Ceramcoat "Matte Varnish" early the next morning. Midday, I flocked the white areas with Woodland Scenics "Snow" flock and late that afternoon I sprayed the figure with Testor's Dullcote.
I have to say that I'm really pleased with how this figure turned out, and I think the idea of using these fellows for Santa's Elves is going to be a winner. Even as I type, I have three more prepped and awaiting painting.
Monday, May 2, 2016
Seelah, Iconic Paladin: Figure 216 of 266
This past week I officially began the Iconics and Officially Licensed Pathfinder Miniatures Set, and painted the Seelah, Iconic Paladin, figure. I say, "officially began", because I had already pulled the Feiya, Iconic Witch, figure from this set to paint up as my Illusionist apprentice for Frostgrave. My plan now it to work on this set in ernest.
Also, this being the 216th figure for me to post, it marks the 50-more-figures-to-go point for me. It's all downhill from here!
I prepped the figure in the usual way; soaking it in a dish of water with a couple drops of dish- soap added, then giving it a light scrub with a soft toothbrush, and then rinsing and drying it. I then glued the figure to a white-primed 1" fender washer with Aleene's Tacky glue, and then glued the washer-mounted figure to a tongue depressor with a couple drops of the Elmer's glue.
I began by painting the the armor and sword entirely in Black. I then drybrushed it with Americana "Neutral Grey".
Next, I drybrushed the armor and sword with Folk Art Metallics "Gunmetal Grey". Then I painted the outside of her cape and the drape at her waist with Crafter's Acrylic "Bright Blue". I then did the lining of the cape, and the face of her shield with Folk Art "Platinum Grey". After that, I painted her head with Americana "Raw Umber".
Next, I highlighted the cape's exterior and the drape at her waist with a mix of the "Bright Blue" and Crafter's Acrylic "Cool Blue". I highlighted the cape's lining, and her shield, with White. I painted her hair, belt, pouch, and sword grip with Black, and then gave her head a coat of GW "Agrax Earthshade" wash.
When the wash was dry, I painted her eyes, and then did highlights on her face with a mix of the "Raw Umber" and Americana "Shading Flesh". Next, I highlighted her hair with Americana "Zinc". I then highlighted her belt, pouch and sword grip with Ceramcoat "Denim Blue". I then painted her bow with Crafter's Acrylic "Cinnamon Brown', the quiver with Nicole's "Brown", the scabbard with Crafter's Acrylic "Navy Blue", and the one object hanging from her back I couldn't identify, with Americana "Asphaltum".
Next, I highlighted the bow with Americana "Sable Brown". I then added trim to the quiver, and painted her hair tie with Americana "Terra Cotta". Afterwards, I painted the arrow fletchings with the "Denim Blue", and used this color to highlight the scabbard too. I highlighted the fletchings with the "Cool Blue". I then did a free-hand design on the shield using the "Bright Blue".
At this point, I got out the metallic"Gunmetal Grey" again, and painted the border around the shield, and the bottom tip of the scabbard. I then used Folk Art Metallics "Silver Sterling" to add highlights to the armor, sword, and shield border.
I had originally mounted her on a white washer to use as a Templar in Frostgrave; but as soon as I started painting her, I had realized she was carrying bow and quiver and there is no bow-armed, sword-wielding, armored class in Frostgrave. (I really like to have my figures match as close to possible to how they are supposed to be armed and armored for this game. WYSIWYG!) So, at this point I used Ceramcoat "Walnut to paint the figure's integral base, and the white washer.
After the figure had overnight to dry, I gave it a coat of Ceramcoat "Matte Varnish" the following morning. Later that morning I flocked the base, and that evening I sprayed the figure with Testor's Dullcote. After the Dullcote was dry, I used a little dab of superglue to affix one of the tiny nail gems to the base of the sword.
I like the way she came out, though I probably should have spent a little more time with the free-hand on the shield. Nonetheless, it is a nice basic figure and was easy to paint.
Figure 216 0f 266: Complete
Also, this being the 216th figure for me to post, it marks the 50-more-figures-to-go point for me. It's all downhill from here!
I prepped the figure in the usual way; soaking it in a dish of water with a couple drops of dish- soap added, then giving it a light scrub with a soft toothbrush, and then rinsing and drying it. I then glued the figure to a white-primed 1" fender washer with Aleene's Tacky glue, and then glued the washer-mounted figure to a tongue depressor with a couple drops of the Elmer's glue.
I began by painting the the armor and sword entirely in Black. I then drybrushed it with Americana "Neutral Grey".
Next, I drybrushed the armor and sword with Folk Art Metallics "Gunmetal Grey". Then I painted the outside of her cape and the drape at her waist with Crafter's Acrylic "Bright Blue". I then did the lining of the cape, and the face of her shield with Folk Art "Platinum Grey". After that, I painted her head with Americana "Raw Umber".
Next, I highlighted the cape's exterior and the drape at her waist with a mix of the "Bright Blue" and Crafter's Acrylic "Cool Blue". I highlighted the cape's lining, and her shield, with White. I painted her hair, belt, pouch, and sword grip with Black, and then gave her head a coat of GW "Agrax Earthshade" wash.
When the wash was dry, I painted her eyes, and then did highlights on her face with a mix of the "Raw Umber" and Americana "Shading Flesh". Next, I highlighted her hair with Americana "Zinc". I then highlighted her belt, pouch and sword grip with Ceramcoat "Denim Blue". I then painted her bow with Crafter's Acrylic "Cinnamon Brown', the quiver with Nicole's "Brown", the scabbard with Crafter's Acrylic "Navy Blue", and the one object hanging from her back I couldn't identify, with Americana "Asphaltum".
Next, I highlighted the bow with Americana "Sable Brown". I then added trim to the quiver, and painted her hair tie with Americana "Terra Cotta". Afterwards, I painted the arrow fletchings with the "Denim Blue", and used this color to highlight the scabbard too. I highlighted the fletchings with the "Cool Blue". I then did a free-hand design on the shield using the "Bright Blue".
At this point, I got out the metallic"Gunmetal Grey" again, and painted the border around the shield, and the bottom tip of the scabbard. I then used Folk Art Metallics "Silver Sterling" to add highlights to the armor, sword, and shield border.
I had originally mounted her on a white washer to use as a Templar in Frostgrave; but as soon as I started painting her, I had realized she was carrying bow and quiver and there is no bow-armed, sword-wielding, armored class in Frostgrave. (I really like to have my figures match as close to possible to how they are supposed to be armed and armored for this game. WYSIWYG!) So, at this point I used Ceramcoat "Walnut to paint the figure's integral base, and the white washer.
After the figure had overnight to dry, I gave it a coat of Ceramcoat "Matte Varnish" the following morning. Later that morning I flocked the base, and that evening I sprayed the figure with Testor's Dullcote. After the Dullcote was dry, I used a little dab of superglue to affix one of the tiny nail gems to the base of the sword.
Figure 216 0f 266: Complete
Thursday, April 28, 2016
Caryatid Columns: Bones II FIgures
This week I painted up the Caryatid Columns from the Bones II, Expansion II, Caryatid Column set. We will be doing the "Living Museum" Frostgrave scenario next campaign session, so I thought I should have at least one statue to contribute. :)
I prepped the figures in the usual way; soaking them in a dish of water with a couple drops of dish- soap added, then giving them a light scrub with a soft toothbrush, and then rinsing and drying them. I then glued each figure to a black-primed 1" fender washers with Aleene's Tacky glue. I then glued the washers to a tongue depressor with a couple drops of the Elmer's glue each.
I didn't want to just do them as regular grey stone, so I decided to paint them as green marble. I began by painting them entirely Black. When the Black was dry, I drybrushed them with Accent "Forest Green", followed by a drybrushing with Americana "Leaf Green".
I then added thin striations, specks, and smudges with White and then Black. Next, I painted their sword blades and their bases with Americana "Zinc".
I painted the eyes of the "living" one with Crafter's Acrylic "Citrus Green", and gave the eyes White pupils. I then drybrushed the bases with Crafter's Acrylic "Storm Cloud Grey", followed by Folk Art "Platinum Grey". Next, I painted the sword hilts with Americana "Terra Cotta". I then went back and painted the sword blades with Folk Art Metallics "Gunmetal Grey", and did highlights with Folk Art Metallics "Silver Sterling". Then I painted the sword hilts with Ceramcoat "Bronze", followed with highlights using Ceramcoat "14K Gold".
After the figures had overnight to dry, I gave them a coat of Ceramcoat "Matte Varnish" the next morning.
I really like how these turned out. I think the green marble look helps raise them above the ordinary.
I prepped the figures in the usual way; soaking them in a dish of water with a couple drops of dish- soap added, then giving them a light scrub with a soft toothbrush, and then rinsing and drying them. I then glued each figure to a black-primed 1" fender washers with Aleene's Tacky glue. I then glued the washers to a tongue depressor with a couple drops of the Elmer's glue each.
I didn't want to just do them as regular grey stone, so I decided to paint them as green marble. I began by painting them entirely Black. When the Black was dry, I drybrushed them with Accent "Forest Green", followed by a drybrushing with Americana "Leaf Green".
I then added thin striations, specks, and smudges with White and then Black. Next, I painted their sword blades and their bases with Americana "Zinc".
I painted the eyes of the "living" one with Crafter's Acrylic "Citrus Green", and gave the eyes White pupils. I then drybrushed the bases with Crafter's Acrylic "Storm Cloud Grey", followed by Folk Art "Platinum Grey". Next, I painted the sword hilts with Americana "Terra Cotta". I then went back and painted the sword blades with Folk Art Metallics "Gunmetal Grey", and did highlights with Folk Art Metallics "Silver Sterling". Then I painted the sword hilts with Ceramcoat "Bronze", followed with highlights using Ceramcoat "14K Gold".
After the figures had overnight to dry, I gave them a coat of Ceramcoat "Matte Varnish" the next morning.
I really like how these turned out. I think the green marble look helps raise them above the ordinary.
Wednesday, April 27, 2016
"All Bones About It" Blog Hits 100K Views!
I'm happy to announce that today this blog hit its 100,000 view! I was lucky enough to check in this morning at 99,999 and was able to refresh once to see it roll over to the big 100K.
This June will mark the 3-year anniversary of this blog; started after receiving my Bones I Kickstarter from Reaper Miniatures. I had hoped this blog would help keep me on task in my goal of painting all 266 figures I had received; because I knew if I didn't set a goal, that most of the figures would probably still be languishing in the box they shipped in. I'm proud of the fact that I have been able to stick with it these three years, and am happy so many folks have supported me along the way.
Next Monday, I will be posting my 216th figure, which will put me just 50 figures away from reaching my goal. Thank you all so much for supporting my efforts along the way, and be sure to stick around for the last stretch; it's all downhill from here!
This June will mark the 3-year anniversary of this blog; started after receiving my Bones I Kickstarter from Reaper Miniatures. I had hoped this blog would help keep me on task in my goal of painting all 266 figures I had received; because I knew if I didn't set a goal, that most of the figures would probably still be languishing in the box they shipped in. I'm proud of the fact that I have been able to stick with it these three years, and am happy so many folks have supported me along the way.
Next Monday, I will be posting my 216th figure, which will put me just 50 figures away from reaching my goal. Thank you all so much for supporting my efforts along the way, and be sure to stick around for the last stretch; it's all downhill from here!
Monday, April 25, 2016
Orc Snipers (Archers): Figures 212-215 of 266
This weekend I finished up the four Orc Sniper figures from the Orcpoclypse add-on set. Ive got two more sets of four to go to complete this set.
I prepped these figures in the usual way, washing them in some dish soap, lightly scrubbing them with a soft toothbrush, and then letting them dry. I then did some conversions to them using Gorilla superglue gel. Looking at the row below; The first orc has his arm sliced at the shoulder and wrist, and repositioned back around to look like he is reaching for an arrow out of his quiver. The second has had his arm sliced at the shoulder and repositioned down to look like he is reaching for his short sword. The third and fourth orcs are unchanged.
After the conversions were done, I glued the four onto black primed 1.25 inch fender washers using Aleene's Tacky glue. I then glued them onto a tongue depressor, for ease of painting, using a couple drops of Elmer's white glue each.
I began by painting them entirely Black; and then when the Black was dry, I drybrushed the chainmail areas with Folk Art Metallics "Gunmetal Grey". I then went back and used the Black to repaint the fur areas where the "Gunmetal Grey" paint had gotten on them.
I then drybrushed the fur garments and the fur boot tops: for the first archer's fur tunic and the third archer's boot tops I used Americana "Zinc", for the second archer's fur tunic and the fourth archer's boot tops I used Crafter's Acrylic "Storm Cloud Grey", for the third archer's fur tunic and the first archer's boot tops I used Americana "Mississippi Mud", and for the fourth archer's fur tunic and the second archer's boot tops I used Folk Art "Dark Brown". Next, I painted their under-tunics: for the first archer I used Ceramcoat "Black Cherry", for the second I used Crafter's Acrylic "African Violet", for the third one I used Americana "Bittersweet Chloclate", and for the fourth I used Crafter's Acrylic "Navy Blue".
I then did their skin with Aleene's "Deep Khaki". Next, I did the belts and pouch on the first two, and the quiver and scabbard on the second two with Nicole's "Brown". I then reversed this, doing the belts and pouch on the second two, and the quiver and scabbard on the first two with Crafter's Edition "Spice Brown". I painted the padding on their wrist guards with Americana "Khaki Tan", and the straps, as well as the sword grips, with Americana "Asphaltum". I then painted their bows with Crafter's Acrylic "Cinnamon Brown".
Next, I painted the fletchings on their arrows with Americana "Neutral Grey", and all the stitching on their belts, scabbards, quivers, and pouches with the "Khaki Tan". I painted their teeth with GW "Bubonic Brown". I then used the metallic "Gunmetal Grey" to paint all the metal fittings on their bows and short swords. Then, after the paint had a while to dry, I gave the figures all a complete wash with GW "Agrax Earthshade" wash using a wet brush.
When the wash was dry, I painted their eyes, and then highlighted their teeth with Americana "Buttermilk". Next, I highlighted all their skin with a mix of the original "Deep Khaki" mixed with a little Aleene's "Dusty Khaki" . I also highlighted each of their tunics with the original colors I had used. I highlighted their belts with Americana "Sable Brown", and hit the stitching again with the "Khaki Tan". I then repainted their boots Black, and then added highlights with the "Neutral Grey". Lastly, I painted their sculpted bases with Ceramcoat "Walnut".
After everything had dried overnight, I gave the figures a coat of Ceramcoat "Matte Varnish" and, when dry, flocked their bases. Another overnight dry, and I sprayed them with Testor's Dullcote".
Though there's nothing extraordinary about them, I'm generally pleased with how they came out. I'm looking forward to seeing how the whole group of orcs looks set out toghether, including the ones from the original 30 New Bones set, when I finally get this set complete.
Figures 212-215: Complete
I prepped these figures in the usual way, washing them in some dish soap, lightly scrubbing them with a soft toothbrush, and then letting them dry. I then did some conversions to them using Gorilla superglue gel. Looking at the row below; The first orc has his arm sliced at the shoulder and wrist, and repositioned back around to look like he is reaching for an arrow out of his quiver. The second has had his arm sliced at the shoulder and repositioned down to look like he is reaching for his short sword. The third and fourth orcs are unchanged.
After the conversions were done, I glued the four onto black primed 1.25 inch fender washers using Aleene's Tacky glue. I then glued them onto a tongue depressor, for ease of painting, using a couple drops of Elmer's white glue each.
I began by painting them entirely Black; and then when the Black was dry, I drybrushed the chainmail areas with Folk Art Metallics "Gunmetal Grey". I then went back and used the Black to repaint the fur areas where the "Gunmetal Grey" paint had gotten on them.
I then drybrushed the fur garments and the fur boot tops: for the first archer's fur tunic and the third archer's boot tops I used Americana "Zinc", for the second archer's fur tunic and the fourth archer's boot tops I used Crafter's Acrylic "Storm Cloud Grey", for the third archer's fur tunic and the first archer's boot tops I used Americana "Mississippi Mud", and for the fourth archer's fur tunic and the second archer's boot tops I used Folk Art "Dark Brown". Next, I painted their under-tunics: for the first archer I used Ceramcoat "Black Cherry", for the second I used Crafter's Acrylic "African Violet", for the third one I used Americana "Bittersweet Chloclate", and for the fourth I used Crafter's Acrylic "Navy Blue".
I then did their skin with Aleene's "Deep Khaki". Next, I did the belts and pouch on the first two, and the quiver and scabbard on the second two with Nicole's "Brown". I then reversed this, doing the belts and pouch on the second two, and the quiver and scabbard on the first two with Crafter's Edition "Spice Brown". I painted the padding on their wrist guards with Americana "Khaki Tan", and the straps, as well as the sword grips, with Americana "Asphaltum". I then painted their bows with Crafter's Acrylic "Cinnamon Brown".
Next, I painted the fletchings on their arrows with Americana "Neutral Grey", and all the stitching on their belts, scabbards, quivers, and pouches with the "Khaki Tan". I painted their teeth with GW "Bubonic Brown". I then used the metallic "Gunmetal Grey" to paint all the metal fittings on their bows and short swords. Then, after the paint had a while to dry, I gave the figures all a complete wash with GW "Agrax Earthshade" wash using a wet brush.
When the wash was dry, I painted their eyes, and then highlighted their teeth with Americana "Buttermilk". Next, I highlighted all their skin with a mix of the original "Deep Khaki" mixed with a little Aleene's "Dusty Khaki" . I also highlighted each of their tunics with the original colors I had used. I highlighted their belts with Americana "Sable Brown", and hit the stitching again with the "Khaki Tan". I then repainted their boots Black, and then added highlights with the "Neutral Grey". Lastly, I painted their sculpted bases with Ceramcoat "Walnut".
After everything had dried overnight, I gave the figures a coat of Ceramcoat "Matte Varnish" and, when dry, flocked their bases. Another overnight dry, and I sprayed them with Testor's Dullcote".
Though there's nothing extraordinary about them, I'm generally pleased with how they came out. I'm looking forward to seeing how the whole group of orcs looks set out toghether, including the ones from the original 30 New Bones set, when I finally get this set complete.
Figures 212-215: Complete
Subscribe to:
Posts (Atom)




































