Monday, November 9, 2020

Maggotcrown Swordsman: Bones 4 Dreadmere Figure

      This past week I painted a set of 4 of the "Maggotcrown Swordsman" figures as a first step in building a 12 man unit of the Maggotcrown soldiers from the Dreadmere Expansion.   I had my original Maggotcrown soldier figures from the Kickstarter, and expanded my unit through trades and direct purchases from Reaper.
       I prepped the figures in the usual way, soaking them in a dish of water with a couple drops of dish-soap added, then giving them a light scrub with a soft toothbrush, and then rinsing and drying them.   I wanted one of the Swordsmen to be the leader of the unit,  so I cut his sword arm at the elbow and repositioned it, and then sculpted him a helmet crest using some greenstuff.  I then glued them all to 1" brown-primed fender washers with Aleene's Tacky glue.  I then glued the washers onto a tongue depressor with a couple drops of Elmer's white glue.
     I wanted to try some Citadel Contrast "Black Templar" paint on these as the base for drybrushing their armor, instead of my usual solid black basecoat, so I began by giving them all complete coats of Ceramcoat "White" to act as a base primer coat for the Contrast paint.   I then painted the armor and shields with Citadel Contrast "Black Templar".
     When the "Black Templar was dry, I drybrushed the armor and swords with Folk Art Metallics "Gunmetal Grey", followed with a drybrushing of Ceramcoat "Metallic Silver", and lastly a light drybrush with some Citadel "Mithril Silver".   After that, I painted the tunics with Reaper MSP Pathfinder "Urgathoa Red".
     Next, I painted the tabards, and the eyes on the shield skulls with Ceramcoat "Black"; and then painted the belts, gloves, and shield straps with Reaper MSP "Coal Black".  After that, I painted the exposed parts of their faces with Citadel Contrast "Gulliman Flesh", and then did the faces of their shields, and the leader's crest with Reaper MSP "Fresh Blood".  I decided at that point that the chainmail was drybrushed too heavily and had lost its detail, so I went back over it with some Citadel "Nuln Oil" wash.  
    While I had the "Nuln Oil" out, I decided I also wanted to define the edges of the tabard, belts, and tunic, a little better, so I traced along the edges where the tabard and belts met the tunic using the wash.  After that, I painted the inside of the shields with some Ceramcoat "Metallic Pewter".  I then painted the skulls on the shields with Americana "Snow White".
     Next, I highlighted the tunics with a mix of the base "Urgathoa Red" mixed with Reaper MSP Bones "Cinnamon Red". I then highlighted the tabards with Ceramcoat "Charcoal" followed with Americana "Zinc"; and followed that with highlighting the belts, gloves and shield straps with Citadel "The Fang".  After highlighting those parts, I highlighted the shields and the officer's crest using Reaper MSP Holly Berry", and some Reaper MSP "Hearth Fire".  Lastly,  I did some highlights on the shoulder skulls and helmets with Reaper MSP "Sparkling Snow", and then painted the bases with Americana "Mississippi Mud".
     I let the Swordsmen dry overnight and the next day I gave them a coat of Americana "DuraClear Matte" varnish.    Then, when  the varnish was dry, I used some white glue to flock the bases.  Another overnight dry, and I sprayed them with Testor's "Dullcote". 



    I'm really pleased with ow these guys turned out.   Sometimes I really appreciate these nice simple, clean and plain, sculpts and what an ease they are to paint. 

4 comments:

  1. They look good - I especially like the officer's added crest! I just wish Reaper had left the shields plain rather than having the big ol' skull sculpted on.

    ReplyDelete
    Replies
    1. Thanks, Norman! I agree, and with Bones Black they aren't as easy to just slice off like they were with regular Bones.
      I will say though, for units like this and less skilled shield painters like me, they are a great way to get a dozen shields to all look identical. :)

      Delete
  2. This is fascinating, I'd sort-of discounted the Maggotcrown soldiers as a bit crude and lumpy from the day I received the Kickstarter, but your paint (and conversion) shows them up as neat, characterful figures. I'll have to dig them out now. Well done!

    ReplyDelete
    Replies
    1. Thank you, Stephen!
      Yes, I have to say I shared you opinion; feeling they were a little cartoony when I first saw them. Painting does really brings out their charm.

      Stay tuned, as tomorrow I plan to post their Spearmen brothers...

      Delete